Sideboard el Fresco!

May 26, 2017

I’ve been playing with ‘Fresco‘ on ‘smalls’ for a few months now. What? You haven’t heard of Fresco? Well aren’t you in for a treat!
Fresco is Fusion Mineral Paint’s texturising powder additive. It does everything except your dishes…well almost.
Add  a little bit of Fresco powder to your paint and you’ll get ….well texture. It will thicken your paint and help highlight your strokes etc. Perfect if you’re wanting a heavier finish that’s not totally flat. Add a little more powder and you can achieve little ridges and raised areas that can be highlighted with dry brushing or decorative waxes. Add a LOT and you can create the most wonderful sea swept, age old crustiness you can imagine! Place your super thick freshly painted Fresco surface out in the hot sun (or hit it with a heat gun) and watch cracks appear at random and little bits of crazing.You can use an art trowel to get it on extra thickly. Use two colours and the results are limitless!
I think Fresco is the most exciting paint product we’ve seen in 2017 so far!

Here are some signs I made using a medium amount of Fresco in my first layer of paint.
Fresco SignFresco SignAnd a crusty bottle! See all the delicious cracks?Fresco BottleA crusty ‘sea swept’ terracotta pot after the Fresco treatment….Fresco PotSo after playing with the Fresco on small things like these, I decided it was time to try it all out on a full sized piece.
I had this Queen Anne sideboard in my stash and had intended to paint it a pretty white, but where’s the challenge in that?  It SO needed to be Frescoed!
Fusion FrescoThe big spanse of ‘nothingness’ on the doors was just screaming out for something bold, so I chose to create a raised stencil on each door front and each of the drawer fronts. Fusion’s Sandstone Texture is the perfect medium for raised stencils. It’s thick enough to hold it’s form and yet spreads easily.
I laid down my stencil and lightly spread the Sandstone Texture over it. You can make your stencil as shallow or as deep as you wish but just remember that the thicker the stencil, the longer it will take to dry. I didn’t do mine very thick and it was a lovely sunny day so it was dry within a couple of hours. It was about this time that I realised I was so intent on what I was doing that I neglected to take a photo!
This piece was pretty shiny so I sanded it all over with 180 sand paper and gave it two coats of Zinsser Bullseye Clear Shellac as I was pretty sure it was going to be a bleeder (most Queen Anne furniture is). My first coat of paint was Fusion ‘Champlain‘….one of my favourite Fusion neutrals and I mixed my Fresco in with this layer. I painted right over my dry raised stencils.
Once that coat was dry I painted a coat of Fusion ‘Algonquin‘ (another favourite). One of the fab things about Fresco is that it dries super hard. So when it’s time to sand…wet and dry sandpaper is the go. 240 grit wet and dry sandpaper to be exact.
You need to have a bowl of water to keep rinsing and dipping your sandpaper into and have a dry cloth in the other hand. Sand a little…wipe dry…sand a little…wipe dry. Wiping dry regularly during your wet sanding allows you to see how much you’ve sanded off. The water re-emulsifies the paint to a degree which makes it hard to see just how much has been remover. Sand a little…wipe dry. This is the part where the magic happens! I loved the results! What do you think? And because Fusion has a built in top coat……there was no need to wax or poly the paint work. Done!Fusion FrescoFusion Fresco

Fusion Sandstone TextureFusion Sandstone TextureFusion Sandstone TextureFusion FrescoFusion Sandstone Texture
I wanted to leave the top wood but I didn’t like the orange so I sanded the top back to bare wood….one coat of paint stripper then my speed file did the rest. Do you have a Speed File? Honestly it’s the best piece of equipment I’ve acquired this year…..a birthday gift from my daughter (who needs perfume anyway….!). It’s just like a loooong sanding block but it sands FAST. The sanding sheets just clip in at each end and they come in a couple of sizes. That’s the sideboard top there all sanded and ready to stain. I used Miss Mustard Seed’s Milk Paint in the colour ‘Curio‘ to stain the top. Milk Paint makes a fantastic stain. Just mix 1 part Milk Paint to 3 parts water and away you go! Paint on….wipe back. Two coats just ten minutes apart gave me a lovely deep walnut top that I later finished with a couple of coats of polyurethane to seal and protect the finish.Fusion FrescoLovely hey!
Curio
I’ll definitely be using Fresco on a big piece again very soon, maybe next time with blues and greens for a true beachy look. I really enjoyed working with it!
Try it….I guarantee you’ll be smitten!
I love receiving comments so please say hi and tell me where you’re from!
I am an Australian Stockist for Fusion Mineral Paint. If you are and International reader (welcome 🙂 ) and would like to source these products in your country pop over to the Fusion Mineral Paint WEBSITE and search your area to find your closest stockist.Fusion FrescoCoast & Country Vintage

Pallet Coffee Mug Holder

March 28, 2017

You know how sometimes when you’re browsing through Pinterest something jumps out at you? (like 99% of somethings in my case….) Well this was one of those somethings!
Pallet Project
I saw this sweet little coffee mug holder and immediately thought of the mini pallet our new farm pump arrived on earlier that month. You don’t see the mini pallets that often!
Pallet ProjectI dragged it out and worked out how many hooks I’d need….went to the hardware and bought them, painted one base coat of Miss Mustard Seed’s Milk Paint in ‘Trophy’ on the pallet….and that was it for about 3 months! Story of my life! But one day I just decided to pull it out and finish it! And it didn’t take too long at all! I layered three different colours of Miss Mustard Seed’s Milk Paint in the colours ‘Schloss, ‘Marzipan’ & ‘Ironstone’ to give it an aged wood look instead of boring pine, then used my Coffee Roasters stencil to make it sing! I finished it off with some shading around the edges with Miss Mustard Seed’s Antiquing Wax. I love quick and easy projects…even if they sometimes take me months!Miss Mustard Seed's Milk PaintMiss Mustard Seed's Milk PaintMiss Mustard Seed's Milk Paint
If your one of my International readers (Hi!) and you’d like to source Miss Mustard seed’s Products pop over to Miss Mustard Seed’s WEBSITE to find a stockist near you!
I love to receive comments and hear what you think so leave me some love!Coast & Country Vintage

Hi there! I’m Hayley Justice in case you haven’t visited my Blog before!
A few months ago I came across a piece another Fusion lover Betsy Crist from Old World New Home in the USA had created with a custom mix of Fusion Mineral Paint’s Little Lamb & Little Whale and contrasted with Limestone. The cherry on top that really made Betsy’s colour scheme steal my heart was the mix of Fusion’s Clear Glaze with some Ash & some Chocolate to make the perfect smokey grey glaze. The Clear Glaze can be made into a coloured glaze with addition of any colour you wish! (the sample sized pots and Tinting Kits are fabulous for making coloured glazes!)

Here’s Betsy’s piece….isn’t it just AHmazing! Oh to have furniture like this in Australia!
Fusion Mineral Paint
I was totally besotted but knew it needed to be ‘just the right piece’ to really show off this gorgeous combo. As luck would have it I found the perfect piece on our local buy and sell and pounced on it! The bonus? It had a matching mirror 🙂 (of course I can’t find the photo I took of the table with the mirror so that will come later…)
Pretty ugly piece right? I’m sure that once upon a time it looked amazing to someone 😉
Now I KNOW you want to know just how to do the glazing…right? So as a bonus, I’m going to share some step by step glazing pics. 🙂
So here’s my ‘beautiful’ before…..
Fusion Mineral Paint project

I sanded the piece all over and applied two coats of Zinsser Clear Bullseye Shellac (being an Indonesian piece there was a 99% chance that this piece was going to bleed tannins through my paint), then painted the piece with Betsy’s custom mix of two parts Little Whale to 1 part Little Lamb which produced the perfect French Blue. The top and detailed areas were painted with Limestone.
Before applying Fusion’s Glazes it’s important to let the paint dry for a few days. Why? Because the paint is water based and so is the glaze so adding the wet glaze to paint that’s not pretty well deep dry will result in you wiping some of your paint right off. Once past it’s 30 day curing time, Fusion is one of the most durable furniture paints on the market. Add to that the fact that it’s so eco friendly (zero VOC’s) then it’s always a winner in my eyes.
I mixed about a teaspoon each of Ash & Chocolate into about 1/4 cup of clear glaze (which was FAR too much for this project but the best news is that the mixed glazes will keep for months if covered properly!
Use a brush to apply the glaze in small sections, swirling it into all the cracks and crevices. Wear gloves for this unless you want colour fingernails!
Fusion Mineral Paint GlazeOnce you’ve covered a section, use a clean Chux brand cloth (not the cheap knock offs as they leave lint!) to wipe away the excess. Keep wiping until you have the look you want.
Fusion Mineral Paint GlazeFusion Mineral Paint GlazeFusion Mineral Paint GlazeThen start on another section. Start and finish at an edge so you don’t go over sections more than once or you’ll get different shading. You have about 10-15 minutes to work with the glaze before it starts to dry properly. If you don’t like what you have done just grab a damp Chux and wipe it right off 🙂
I did the whole top section of this piece in one go.Fusion Mineral Paint GlazeFusion Mineral Paint Glaze
Pretty huh?
And here’s the finished piece all staged and ready for sale. This piece is at Waverley Antiques Bazaar if you’re interested in adding this gorgeous piece to your home!
Fusion Mineral Paint MelbourneFusion Mineral Paint MelbourneFusion Mineral Paint MelbourneFusion Mineral Paint MelbourneFusion Mineral Paint MelbourneFusion Mineral Paint AustraliaFusion Mineral Paint Australia
From just plain tacky…to Ooh La La French!Fusion Mineral Paint Australia
A short time ago I did a live video on Facebook showing how to apply the Fusion Antiquing Glaze if you’d like to take a peek! Just click here !Coast & Country Vintage